Honeywell CT3500 Owner's Manual page 16

The setpoint temperature range is 40°F to 90°F (5°C to 2°C) for heating and 45°F to 99°F (7°C to 37°C) for cooling.
Heat/Cool
q
Press to switch between heating and cooling setpoints.
Settings
NOTE: Program times are the same for heating and cooling.
q
Press or until the display shows the desired temperature setpoint.
q
Press ,
Leave Return
Program Saturday and Sunday
Repeat each step in Program Weekdays for Saturday and Sunday.
Run
q
Press when the entire week is programmed.
Program
Clear a Program Period
NOTE: Wake cannot be cleared.
q
Press ,
Leave Return
q
Press until the desired day displays (Mon-Fri Sat; Sun).
Day
q
Press and hold the
q
Repeat the above steps for each period to be cleared.
Run
q
Press .
Program
69-1199—4
or and repeat these steps for each time period. Your weekday is now programmed.
Sleep
, or for the program period you want to clear.
Sleep
, , or
Leave Return Sleep
for approximately 3 seconds until the time and temperature clear.
16