Machine Compartment & Electric Box; Condenser Fan; Sub-Condenser - Samsung RS20NCSL Service Manual

8-3. Machine compartment
Machine Compartment & Electric Box
1) Disconnect the compressor cover by releasing
the screws(6EA).
2) Remove the screws which are securing the
electric box. and press the tap in electric box
coverto take outbyusing a flat-blade screw
driver.
driver
(-)
PCB-MAIN ASSY
The condenser fan is located in the middle of
machine compartment it cools down the sub-
condenser and compressor.
1) Disconnect the wire connector of Fan.
2) Remove the screws (1 EA) on the drain water
3)Take out the condenser fan assembly.
The sub-condenser is located in the machine
compartment.
1) Desolder the compressor discharge & the
2) Take out the sub condenser.
driver
(+)
21

Condenser Fan

tray.

Sub-condenser

outlet of sub-condensor.
Desoldering Point