Picture Settings; Language Settings; Menu Settings - Philips DTR 230 User Manual

DSR220co.book Page 24 Lundi, 18. janvier 2010 6:23 18
Letter box 14:9
TV Output Format
For the "TV Output Format", the formats RGB,
video (CVBS) and S-Video (Y/C) are
provided. Here RGB presents the correct
selection in most cases.
VCR Output Format
Note
This item can only be selected, if you did not
selected RGB with regard to the "TV Output
Format".
Here you can choose between Video (CVBS)
and S-Video (Y/C).
AFD Automatic
The broadcast picture format may deviate from
the picture format to be displayed. AFD
recognizes and corrects the presentation if you
select the option ON.
Restore Default settings
By means of this function you reset the
configuration for the picture settings to previous
set default values. These settings in most cases
allow for an acceptable image & language
reproduction.

4.18 Language settings

Menu language
Here you set the language of the OSD (on-screen
display).
24
Audio language
This setting represents Select a reproduction language for the programs.
a compromise between
Audio language #2
the other two settings.
Select an optional reproduction language for the
Small black bars are
programs.
inserted and only a bit
of the left and right
Audio Description Automatic
picture border is cut
Select Off or On to enable or disable audio
off.
description provided by the broadcaster.
If the desired program is not broadcast in the
language set under "audio language", the "Audio
language #2" is used.
Subtitle language
Select a language for the subtitles.
Subtitle language #2
Select an optional subtitle language for the
subtitles, see also "Audio language #2".
Subtitles Automatic
Set this option to On if you want to
automatically show broadcast subtitles in the
selected subtitle language (default: Off).

4.19 Menu settings

Info Banner Duration
Here you define for how long the information
banner is to be shown with regard to a change of
channel (see page 15). If you want to completely
eliminate the information banner in case of a
change of channel, select None.
Info Banner Automatic
At the start of a new program, the information
banner is automatically shown as a default. If you
do not want this, select Off.
Note
Operation