Sanyo PLC-XM100 Owner's Manual page 49

Video Input
Offset(Red/Green/Blue)
green/blue tone of the black level of an image (from 0 to 63).
Sharpness
(from 0 to 31).
Gamma
better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Press the Point
Off ........... Noise reduction mode is Off.
On ........... Noise reduction mode is On.
Progressive
An interlaced video signal can be displayed in progressive mode.
Off ........... Progressive scan mode is Off.
On ........... Progressive scan mode is On.
Film ......... For watching a film. With this function, the projector
reproduces pictures faithful to the original film quality.
Reset
To reset the adjusted data, select Reset and press the SELECT
button. A confirmation box appears and then select Yes. All
adjustments will return to their previous figures.
Store
To store the adjusted data, select Store
Images 1 to 10 and press the SELECT button.
A confirmation box appears and then select Yes. Stored data can
be called up by selecting an Image (1-10) in the Image Mode
Selection on page 46.
Note:
• N oise reduction and Progressive cannot be selected when
480p, 575p or 720p is selected (p.45).
• N oise reduction cannot be selected when 1080p is selected
(p.45).
48
Store
Image 1
Image 2
Image 3
Image 4
Image 5
Image 6
Image 7
Image 8
Image 9
Image 10
A confirmation box
appears and then
select Yes.
Where to store?