Video Drive (Vsd) Lens; Exposure Mode; Automatic Exposure Mode; Manual Exposure Mode - Honeywell HCC334L User Manual

2. Slowly turn the LEVEL potentiometer until the picture on
the monitor is as clear as possible and is not too bright.

Video Drive (VSD) Lens

Set the VSD/DC switch on the rear of the camera (see
Figure 3) to VSD.

Exposure Mode

Automatic Exposure Mode

The Electronic Exposure feature compensates for excessive
light levels by automatically adjusting the shutter speed of
the camera. Set the EE/ME switch to EE (recommended
setting).

Manual Exposure Mode

Set the EE/ME switch to ME. This setting is typically used
only in machine vision applications. The table below gives
the shutter speeds for the switch settings.
EE
ME
AES
AI
OFF
BLC
OFF
FL
OFF
AGC
OFF
WB3
OFF
WB2
OFF
WB1
= ON
LEGEND
= OFF
Caution Before you adjust the shutter speed, it is important
that you understand how the settings can affect
the scene detail.
Rev 3
Shutter
speed(s)
1/50 (PAL)
1/60 (NTSC)
1/100 (PAL)
1/120 (NTSC)
1/250
1/500
1/1000
1/2000
1/4000
1/10000
Switch Label
FL BLC
OFF ON
ON ON
OFF OFF
ON OFF
OFF ON
ON ON
OFF OFF
ON OFF
5
AES/AI
OFF
OFF
OFF
OFF
ON
ON
ON
ON
G-113077-002
01/07