Memory Card Operation - Boss Audio Systems 810DBI User Manual

OPERATION
"Searching track directly" => "Searching
Directory or File Name"=> "Navigation"
from root => "Navigation" from current
directory.
Searching Track Directly
Press AS/PS button (7) for one time.
The unit searches the track selected by
the volume
Then press the SEL button (5) or BND
button (18) to start playing the track.
Searching Directory or File Name
Press AS/PS button (7) two times.
The unit searches files and directories
that have the same character which is
inputted by the user pressing volume
/ buttons (2&3).
Explain as follows:
- Use the volume
(2&3) to select the characters A to Z,
blank, 0 to 9, _, -, +.
- Press the SEL button (5) to confirm
entry of each character.
- Press BND button (18) to start the
title search.
Searching From Root Directory
Press AS/PS button (7) three times.
The unit searches file or directory from
root by the volume
(2&3).
Select the desired directory/songs by
using the volume
(2&3) and BND button (18) to confirm. If
the selected title is a song, it starts to
play.
If the selected title is a directory name,
display will show (' '), then
- Use the volume
(2&3) to list all songs under this
directory and select the title.
- Press BND button to confirm and
start the play.
- Repeat the above steps if the newly
selected title is again a directory.
/ buttons (2&3).
/ buttons
/ buttons
/ buttons
/ buttons
Searching From Current Directory
Press AS/PS button (7) four times. The
unit searches file or directory from
current directory by the volume
buttons (2&3). The user can select the
directory or file in the directory by the
volume /
selected file can be played by pressing
BND button (18).
DISPLAY INFORMATION
Press DISP button (4) to show the
following information, such as the clock,
ID3 TAG (if available: song title, directory
name, artist name, other contents...) (FOR
MP3 ID3 FUNCTION VERSION ONLY)
and other information.
Note：
The main unit can only support the
standard USB-memory device.
USB MP3 player is not a standard
which means different brand name or
different models
standard. So our product cannot
support all MP3 players.
When connecting an MP3 player and
there has normal battery in the player
(non rechargeable battery), you should
remove the battery from the MP3
player then connect it to the USB
interface. Otherwise, it may cause
battery burst.
When in USB play mode, be sure not
to remove the USB driver from the USB
interface.

MEMORY CARD OPERATION

When removing the control panel, you will
see a memory card interface (25) on the
housing of the unit.
When you insert a memory card in the
memory card interface, the unit will search
the MP3 files in the card and start to play
MP3 files automatically.
buttons (2&3). The
have their
/
own