Bluetooth-enabled in-dash mp3-compatible digital media am/fm receiver featuring iphone docking cradle and usb and sd memory card ports and front panel aux input (18 pages)
Page 1
DESCRIPTION OF CONTROLS ON THE FRONT CONTROL PANEL Front Control Panel Front Cabinet after removing Front Control Panel 1. RELEASE button 9. 1/TOP/>|| button 16. USB socket 2. SEL & VOL knob 10. 2/INT button 17. APS button 3. POWER & MUTE button 11.
DESCRIPTION OF BUTTONS ON REMOTE CONTROL 1. POWER button 2. A.P button 3. SCN(SCAN) button 4. CLK button 5. MODE button 6. BND(BAND) button 7. Number(0~9) buttons 8. * button 9. MUTE button 10. T-M button 11. TEL button 12. CLEAR button 13.
Page 3
Common operation: 1. To turn the unit on/off . When the unit is power Off, it may be switched On by pressing any button except RELEASE button. When the unit is switched On, press and hold POWER button for more than 1 second, to switch the power off.
Page 4
6. ID3 FUNCTION In USB/CARD mode, during playback, if you press CLK button on remote control then the information of the songs title, artist, etc will display on the LCD. As long as the current playing music contains relevant ID3 tag information. Press again to cancel the ID3 function.
Page 5
current station in the preset memory bank of the number button for the current band. In this way the unit can store 30 preset stations. 2) Press one of the 6 number buttons briefly to turn on the preset station stored in the preset memory bank of the number button for the current band.
Page 6
Press RPT button twice to play the tracks in the Album repeatedly, and the LCD will display RPT DIR. Press RPT button thrice to cancel RPT function, and the LCD will display OFF. 8. To play tracks in random During playback, press RDM button briefly to play all tracks in random. Press it again to cancel RDM function.
Page 7
B) Dial with remote control with the following procedures: 1) Briefly press TEL button , then CALL will appear on LCD. Input telephone number with number buttons 0-9. Briefly press CLEAR button to cancel the incorrectly entered number if necessary. Press and hold CLEAR button to cancel all numbers entered if necessary.
INSTALLATION METHOD This is an anti-theft installation method. The main unit wears a METAL MOUNTING SLEEVE. Please connect the wiring, eg, the Power Supply, the Speakers and the Antenna according to the requirements of this Instruction Manual, then install the metal mounting sleeve into the car as per the diagram illustrated below.
WIRES CONNECTION ISO SOCKET SKETCH CONNECTOR A CONNECTOR B 1. VIOLET R.R SP(+) 2. VIOLET BLACK R.R SP(-) 3. GREY F.R SP(+) 4. MEMORY +12V 4. GREY BLACK F.R SP(-) 5. AUTO ANTENNA B+ 5. WHITE F.L SP(+) 6. WHITE BLACK F.L SP(-) 7.
SPECIFICATION GENERAL Supply Voltage DC 12V. Negative Ground Current Consumption Max.10A Power Output 4 x 60 W Number of channels 2 STEREO channels. (L X W X H): 7” X 3.93” X 4.13” par Unit Dimensions 178 X 100 X 105 (mm) FM SECTION Frequency range 87.5 Mhz - 107.9Mhz...