Download Print this page

Fujitsu Primergy ECONEL 100 S2 System Configuration And Order-Information Manual page 7

Mono-processor tower server
Hide thumbs Also See for Primergy ECONEL 100 S2:

Advertisement

PRIMERGY ECONEL 100 S2
Internal backup device (USB)
USB Interface
(internal)
External DVD-RAM/DVD-ROM/CD-ROM
USB Interface
LAN Card
PCI Express
Bus
PCI Bus
Parallel Port Option
PCI Slot
Specifications are subject to change without notice. For the latest detailed information, contact your local representative.
All brand names and product names are trademarks and registered trademarks of their respective holders.
©2008 Fujitsu Limited. All rights reserved. Printed in Japan.
USB Cable
PG-CBLU005
PGBCBLU005 (for CTO)
DVD-RAM / DVD-ROM / CD-ROM
USB Extension Cable
PG-CBLU002
On-board LAN
Eth. Ctrl 1x1Gbit PCI-E 1000-BASE-T
PG-285
PGB285 (for CTO)
* No AFT/ALB Support
*. Supported versions of Linux are 5.2 or later and 4.7 or later.
Eth. Ctrl 1x1Gbit PCI 1000-BASE-T
PG-1853
PGB1853 (for CTO)
* No AFT/ALB Support
Parallel Port
PG-PP08
*. This option occupies one PCI slot.
Tape Drv DAT72 36GB internal
PG-DT5043
PGBDT5043 (for CTO)
*. One internal backup device can be mounted.
Internal Data Cartridge Drive Unit
PG-RD1021
PGBRD1021 (for CTO)
*. One internal backup device can be mounted.
*. If you would like to purchase data cartridges,
please refer to the following web site.
http://www.tandbergdata.com/sales-apac.html
Twist Pair Cable ( Category 5e)
Twist Pair Cable ( Category 5e)

Advertisement

loading