Disassembly And Assembly Of Main Component - Panasonic SC-TM900DVD Service Manual

16 Disassembly and Assembly of Main Component

"ATTENTION SERVICER"
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation of the major printed circuit boards and replacing the main
components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
4. Refer to the Parts No. on the page of "Parts Location and Replacement Parts List" (Section 26), if necessary.
16.1. Disassembly steps
Disassembly of Top Cabinet
Disassembly of Rear Panel
Disassembly of DVD Changer Unit
Disassembly of Main P.C.B.
Disassembly of Sub-Power P.C.B.
Disassembly of Power P.C.B.
Disassembly of Transformer P.C.B. & Voltage Selector
Disassembly of Front Panel Unit
Disassembly of Mic P.C.B. & Panel P.C.B.
Disassembly of Deck Mechanism Unit
Replacement for Deck Mechanism P.C.B.
Replacement for Traverse Deck
Replacement for Optical Pickup Unit (DVD Mechanism)
Procedure for removing CD loading mechanism
CR16 mechanism disassembly procedure
CR16 mechanism assembly procedure
Disassembly for Traverse Unit
Replacement for cassette lid ass'y
Rectification for tape jam problem
25