1 Disassembly Process SUBWOOFER(
1.1.
Disassembly of Front Panel Assembly
Step 1: Remove 6 screws from Front Panel Assembly.
Step 2: Slot in a steel ruler to make a gap allowance between
Front Panel Assembly and Wooden Cabinet Assembly as
arrow shown.
Step 3: Slot a piece of wood chip in between Front Panel
Assembly and the steel ruler as arrow shown.
Step 4: Use the screwdriver to slightly lift up Front Panel
Assembly as arrow shown.
Note:
Be careful with the bosses which are glued to Wooden Cabinet
Assembly.
Step 5: Remove Front Panel Assembly from Wooden Cabinet
Assembly as arrow shown.
1.1.1.
Assembly of Front Panel Assembly
2
service m. speaker
)
SC-TM950DIN/1000DVD