Network Cards - Honeywell Dolphin 7850 User Manual

Network Cards

The Connections tab (see
displays the network cards installed in the terminal.
1. Tap Start > Settings > Connections > Network Cards
2. Tap on an adapter in the list to review its settings. (Server-assigned IP addresses use DHCP.)
3. If you make a change on one of these tabs, tap OK to confirm the changes.
4. You must perform a soft reset to update the registry entries; see
15. During the soft reset, the new registry entries are created and can be read by the applications
that need them.
Do NOT perform a
!
the terminal to factory defaults, which erases network adapter modifications made here.
7 - 12
Connections Tab
Hard Reset (Cold Boot) (see page 3-15) after modifying an adapter here. Hard resets return
4/30/2008
on page 7-6) contains a Network Cards icon
Rev C
Soft Reset (Warm Boot)
Dolphin® 7850 Mobile Computer
that
on page 3-
User's Guide