Honeywell Dolphin 7850 User Manual page 128

Using the Mounting Brackets
A wall mount kit can be purchased separately. It contains two mounting brackets to secure both ends of
the ChargeBase. Use the screws and the mounting brackets to mount the ChargeBase to a wall or other
vertical surface. Each mounting bracket contains an open slot in the back to accommodate the connector
cables.
The bottom panel of the ChargeBase contains rubber feet that hold it steady on a flat surface. We
recommend that those rubber feet be removed with pliers prior to applying the mounting brackets to the
bottom panel.
1. Secure the screws into the four(4) screw slots on the bottom panel. Insert the heads into the round
end and slide towards the narrow end until the screw is secure.
2. Using the nuts and bolts, secure the mounting brackets to the bottom panel.
3. Secure the mounting brackets to an appropriate horizontal surface.
11 - 8 Rev C Dolphin® 7850 Mobile Computer
4/30/2008
User's Guide