Mounting The Chargebase - Honeywell Dolphin 7850 User Manual

Mounting the ChargeBase

The ChargeBase should be placed on a dry, stable surface. To easily adapt the ChargeBase to your
environment, it can be mounted on a flat, horizontal surface such as a desktop or workbench, or a flat,
vertical surface such as a wall.
When choosing a location, always bear in mind that
• The mounting location must allow users easy access to the power connector.
• The ChargeBase should be oriented so that users can easily read the labels.
Bottom Panel
The bottom panel of the ChargeBase offers two mounting options: insert a DIN Rail in the available slot
for desk mounting or secure two mounting brackets with the available screw slots.
Screw Slots
Rubber Feet
DIN Rail Slot
Using the DIN Rail
Charging/communication cradles have a slot for a 7.5mm (high) X 35mm (wide) DIN rail on the bottom
panel that enables you to mount to a desk or secure, flat surface.
1. Slide the DIN Rail into the DIN Rail slot on the bottom panel.
2. Turn the ChargeBase and DIN Rail right side up.
11 - 6 Rev C Dolphin® 7850 Mobile Computer
4/30/2008
User's Guide