Hardware Management; About The Iomega Storcenter Px2-300D Components; Front Panel - Iomega StorCenter px2-300d User Manual

Hardware Management

About the Iomega StorCenter px2-300d Components

This topic describes the front and rear panel components of the px2-300d.

Front Panel

Status Indicators, Buttons and Ports
1. LCD display — Scroll through the display screen to view the device name, free disk space, IP
address, and date and time. You can initiate a QuikTransfer Copy Job from the LCD and view or
dismiss any errors or warnings on the px2-300d without having to turn on your computer.
2. Display control buttons — Press to scroll the display screen; select options and functions shown
on the display.
3. Power button — Press and release to power the px2-300d on or off. CAUTION! Holding the power
button for 4 seconds will result in a forced shutdown and could cause data loss if data transfers are
in process.
4. Status indicators — Displays the current operational status of the px2-300d.

System Status: Off when the system is functioning normally. Flashes blue during RAID
rebuild. Flashes red if there is a system or drive error. Use the LCD display or the device
console to view details.

Disk Activity: Flashes blue during disk activity. Flashes red if there is a drive error or
degraded drive mode. Off if all drives are removed.

Power: Flashes white during system startup. Glows solid white when the px2-300d is
powered up and ready.
149