Menu Access; Setting And Unsetting With Group Choice - Honeywell GALAXY 16103 User Manual

Setting and Unsetting With Group Choice

With group choice, setting is initiated as normal, using a code, tag or fob. However, a choice of
groups will then be displayed along with the current status of each group.
The status can be changed for each group by pressing the appropriate number button and the
display will cycle through the possible options.
Pressing the ent key will implement the status shown.
If a code, keyfob or tag is used while an entry timer is running or an alarm is in progress, the
group that is active will be unset immediately, without any status needing to be changed on the
keypad.

Menu Access

To access the other functions of the system, users can enter the menu mode by typing their
PIN code and pressing the ent button. This will display the first menu item after showing
system status for 5 seconds.
Users can then navigate around the menu using the scroll keys, ent key and esc key, or they
can jump to any specific menu item directly by typing the number of the item. An overview of
all the accessible functions is shown below. Not all users will be able to access all of the
functions. This will depend on their 'user type' that is set up in menu 42.
10 = Setting
11 = Omit Zones 21 = Zone Status
12 = Timed Set
13 = Part Set
14 = Night Set
15 = Chime
The function of each menu item is described in the following pages.
S E T S E T S E T
S E T S E T
G R O U P S G R O U P S
G R O U P S G R O U P S G R O U P S
10 = Setting 10 = Setting 10 = Setting
10 = Setting 10 = Setting
[ent] to Select [ent] to Select [ent] to Select [ent] to Select [ent] to Select
20 = Display
22 = View Log
23 = System Version
24 = Print
Table 1. Menu Access
123 123 123
123 123
SUU SUU
SUU SUU SUU
30 = Test 40 = Modify
31 = Walk Test 41 = Time/Date
32 = Output Test 42 = Users
44 = Mobile Nos
47 = Remote Access
48 = Level 3 Access
7
S = SET
U = UNSET