Powering Off The Projector - LG BE320-SD Owner's Manual

Powering Off the Projector

1. P ress the "POWER
a message as below on the on-screen display.
2. Press the " POWER
3. T he cooling fan continues to operate for cooling cycle and
the POWER LED will flash orange. When the POWER LED
is orange, the projector has entered standby mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and has
enter standby mode.
Once in standby mode, simply press "POWER
the projector.
4. D isconnect the power cable from the electrical outlet and the
projector.
5. D o not turn on the projector immediately following a power
off procedure.
Installation
" to turn off the projector, you will see
" again to confirm.
" to restart
7
English
English