Codabar; Codabar Start/Stop Characters; Codabar Check Character - Honeywell 2020 User Manual

Codabar

<Default All Codabar Settings>
Codabar
* On
Off

Codabar Start/Stop Characters

Start/Stop characters identify the leading and trailing ends of the barcode. You
may either transmit, or not transmit Start/Stop characters.
Default = Don't Transmit .
Transmit
* Don't Transmit

Codabar Check Character

Codabar check characters are created using different "modulos." You can pro-
gram the image scanner to read only Codabar barcodes with Modulo 16 check
characters. Default = No Check Character.
No Check Character indicates that the image scanner reads and transmits bar-
code data with or without a check character.
When Check Character is set to Validate and Transmit , the image scanner will
only read Codabar barcodes printed with a check character, and will transmit
this character at the end of the scanned data.
6 - 3