Interfunction Delay
An interfunction delay of up to 495 milliseconds may be placed between the
transmission of each segment of the message string. Scan the Interfunction
Delay barcode below, then scan the number of milliseconds and the SAVE bar-
code using the
Programming Chart
To remove this delay, scan the Interfunction Delay barcode, then set the num-
ber of steps to 0. Scan the SAVE barcode using the
the back cover of this manual.
Intermessage Delay
An intermessage delay of up to 495 milliseconds may be placed between each
scan transmission. Scan the Intermessage Delay barcode below, then scan
the number of milliseconds and the SAVE barcode using the
Chart
inside the back cover of this manual.
1st Scan Transmission
To remove this delay, scan the Intermessage Delay barcode, then set the num-
ber of steps to 0. Scan the SAVE barcode using the
the back cover of this manual.
4 - 6
inside the back cover of this manual.
Prefix
Scanned Data
STX
1
HT
Interfunction Delays
Interfunction Delay
Intermessage Delay
Intermessage Delay
Suffix
2 3 4 5
CR
Programming Chart
2nd Scan Transmission
Programming Chart
LF
Programming
inside
inside