Using 'Dynamic Ip' As Broadband Connection Type - Edimax BR-622nC User Manual

2‐4‐1 Using 'Dynamic IP' as broadband connection type
If your Internet service provider will assign IP address to you automatically by 'DHCP'
(Dynamic Host Configuration Protocol), you need to select this connection type.
Here are descriptions of every setup items:
Item Name
Host Name
MAC address
If you wish to select another connection type as broadband connection type, click 'Back'; or
you can click 'OK' to finish with quick setup. You'll see the following messages:
Please click 'Apply' to save changes you made and restart the broadband router, this
requires about 30 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.
Description
Please input the host name of your computer,
this is optional, and only required if your
service provider asks you to do so.
Please input MAC address of your computer
here, if your service provider only permits
computer with certain MAC address to access
internet. If you're using the computer which
used to connect to Internet via cable modem,
you can simply press 'Clone Mac address'
button to fill the MAC address field with the
MAC address of your computer.