WALL MOUNTING
The base unit can be mounted on a wall.
1. Drill two holes spaced
2. Insert the tabs of the wall
8.4 cm (3.3 inches) apart
mounting plate (included)
and install two screws.
into the openings of the
base unit, then push it in
the direction of the arrow.
8.4 cn;
(3.3 inches)
3. Mount the base unit on the
wall.
LOCATING THE HANDSET FROM THE BASE UNIT
This feature helps you find the handset if misplaced. You may also locate a person at the
handset from the base unit by sounding beep tones for 60 seconds.
If the handset is in use, locating is not available.
1. Press m
button on the base unit.
The IN USE indicator flashes and the handset beeps.
To stop the beeping, press -1
button again.
Helpful Hint:
Pressing the ITALK] button on the handset stops the
beeping and the IN USE indicator on the base unit
changes from flashing to a steady light.
LOCATOR Button
10