Nikon Speedlight SB-700 User Manual page 133

Warning indicator
Incompatible
camera warning
(CLS-compatible)
Incompatible
camera warning
(non-CLS-compatible)
Bounce × ash warning
Cause
The power switch/
wireless mode switch
for multiple × ash units
is set to [MASTER] when
used with a camera
not compatible with
Advanced Wireless
Lighting multiple × ash-
unit photography.
The mode selector is set
to [TTL] or [GN], or the
power switch/wireless
mode switch for multiple
× ash units is set to
[MASTER] or [REMOTE]
when used with a non-
CLS-compatible camera.
Distance-priority
manual × ash mode
was set while the × ash
head was tilted up or
rotated to the right
or left.
Power zoom function
does not work
properly.
Solution
Set the power
switch/wireless mode
switch for multiple
× ash units to [ON].
Set the power
switch/wireless mode
switch for multiple
× ash units to [ON]
and the mode
selector to [M].
• Return the × ash head
to the front position
or tilt it downward.
• Set the × ash mode to
i-TTL or manual × ash.
• Turn the SB-700
off and on again.
• If the warning
indicator remains,
contact your
retailer or Nikon
representative.
0
F-1
F-1
C-14
—
H
H–4