Errors While Scanning; Symbology Parameter Defaults - Motorola LI4278 Product Reference Manual

11 - 2 LI4278 Product Reference Guide

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Symbology Parameter Defaults

Table 11-1 lists the defaults for all symbologies parameters. To change the default values, scan the appropriate
bar codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, scan the
NOTE See
miscellaneous default parameters.
Parameter Defaults
Table 11-1
Parameter
UPC/EAN
UPC-A
UPC-E
UPC-E1
EAN-8/JAN 8
EAN-13/JAN 13
Bookland EAN
Decode UPC/EAN/JAN Supplementals (2 and 5 digits)
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
UPC/EAN/JAN Supplemental Redundancy
UPC/EAN/JAN Supplemental AIM ID Format
Transmit UPC-A Check Digit
Transmit UPC-E Check Digit
Transmit UPC-E1 Check Digit
UPC-A Preamble
UPC-E Preamble
UPC-E1 Preamble
Convert UPC-E to A
Convert UPC-E1 to A
Default Parameters on page
Appendix A, STANDARD DEFAULT PARAMETERS
5-4.
for all user preferences, hosts, and
Parameter
Default
Number
01h Enable
02h Enable
0Ch Disable
04h Enable
03h Enable
53h Disable
10h Ignore
000
F1h 43h
F1h 44h
50h 10
F1h A0h Combined
28h Enable
29h Enable
2Ah Enable
22h System Character
23h System Character
24h System Character
25h Disable
26h Disable
Page
Number
11-6
11-6
11-7
11-7
11-8
11-8
11-10
11-12
11-12
11-13
11-14
11-14
11-15
11-16
11-17
11-18
11-19
11-19