Printed Wiring Boards And Schematic Diagram - Sony DVP-NC625 Service Manual

DVP-NC625/NC665P
4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
THIS NOTE IS COMMON FOR WIRING BOARDS AND SCHEMATIC DIAGRAMS
(In addition to this, the necessary note is printed in each block)
(For printed wiring boards)
• : indicates a lead wire mounted on the component side.
• : indicates a lead wire mounted on the printed side.
• a : Through hole.
• : Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
Caution:
Pattern face side: Parts on the pattern face side seen from
(Side B) the pattern face are indicated.
Parts face side: Parts on the parts face side seen from
(Side A) the parts face are indicated.
• Abbreviation
US : USA model
CND : Canadian model
PX : PX model
E : Latin model
MX : Mexico model
AEP : AEP model
UK : UK model
SP : Singapore model
AUS : Australia model
(For schematic diagrams)
• All capacitors are in µF unless otherwise noted. pF : µµF.
50V or less are not indicated except for electrolytics and
tantalums.
• All resistors are in ohms, 1/4 W (Chip resistors : 1 /10 W) un-
less otherwise specified.
kΩ=1000Ω, MΩ=1000kΩ.
• Caution when replacing chip parts.
New parts must be attached after removal of chip.
Be careful not to heat the minus side of tantalum capacitor,
because it is damaged by the heat.
• All variable and adjustable resistors have characteristic curve
B, unless otherwise noted.
• : non flammable resistor
• : fusible resistor
• : panel designation
• f : internal component.
• : adjustment for repair.
• : B+ Line
B +
• : B– Line
B –
• Circled numbers refer to waveforms.
• Voltages are dc between measurement point.
• Readings are taken with a color-bar signals on DVD refer-ence
disc and when playing CD reference disc.
• Readings are taken with a digital multimeter (DC 10MW).
• Voltage variations may be noted due to normal production tol-
erances.
Note : Note :
The components identified by Les composants identifiés par
mark or dotted line with mark une marque sont critiques
pour la sécurité.
are critical for safety.
Replace only with part number Ne les remplacer que par une
specified. pièce portant le numéro spécifié.
When indicating parts by reference number, please include
the board name.
4-3 4-4