Sony DVP-NC625 Service Manual page 15

B
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
CD/DVD player
Stereo audio cord
Coaxial digital
(not supplied)
cord (not supplied)
or or
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
(white)
Remove jack cap
before connecting.
to coaxial or optical
digital input
[Speakers]
Stereo amplifier (receiver)
Front (L)
Front (R)
l: Signal flow
D
This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV
amplifier (receiver).
CD/DVD player
to DIGITAL OUT
(COAXIAL)
Coaxial digital cord
or
(not supplied)
to coaxial digital
input
[Speakers]
AV amplifier (receiver) having
a decoder
Rear (L) Subwoofer
Rear (R)
l: Signal flow
Note
After you have completed the connection, be sure to
set "DOLBY DIGITAL" to "DOLBY DIGITAL"
and "DTS" to "ON" in Quick Setup (page 24).
. If the amplifier
B-1
.
B-2
(white)
(red)
to LINE OUT L/R (AUDIO)
(red)
to audio input
MD deck/DAT deck
c continued
to DIGITAL OUT
(OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting.
to optical digital
input
[Speakers]
Center
Front (L)
Front (R)
c continued
C
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
(receiver) has a digital input jack, use
CD/DVD player
Coaxial digital cord
(not supplied)
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting.
to coaxial or optical digital input
[Speakers]
Rear (L) Rear (R)
Subwoofer
l: Signal flow
Note
When connecting 6 speakers, replace the monaural
rear speaker with a center speaker, 2 rear speakers
and a subwoofer.
Plug the player and TV power cords into an AC outlet.
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
[/1
Press PROGRESSIVE on the front panel
only if you have made video connection
C (page 16) and wish to view
progressive video signals. The
PROGRESSIVE indicator lights up in
blue when the player outputs progressive
signal.
"Press [ENTER] to run QUICK SETUP."
appears at the bottom of the screen. If this
message does not appear, select
"QUICK" under "SETUP" in the Control
Menu to run Quick Setup (page 64).
1-5
C-1 . If your amplifier
.
C-2
Stereo
audio cord (not
supplied)
(white)
or or
(red)
to LINE OUT L/R (AUDIO)
(white) (red)
to audio input
[Speakers]
Amplifier (receiver) with Dolby
Surround decoder
Front (L) Front (R)
Center Rear (mono)
The Setup Display for selecting the
language used in the on-screen display
appears.
LANGUAGE SETUP
OSD: ENGLISH
ENGLISH
MENU:
AUDIO: FRENCH
SUBTITLE: SPANISH
PORTUGUESE
X x
The player uses the language selected
here to display the menu and subtitles as
well.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE: 4:3 LETTER BOX
4:3 LETTER BOX
SCREEN SAVER:
BACKGROUND: 4:3 PAN SCAN
BLACK LEVEL:
BLACK LEVEL :
(COMPONENT OUT)
16:9
ON