Removing The Lcd Brackets And Fpc Cable - Acer eMachines E720 Series Service Manual

Acer emachines e720/e520 series service guide
Table of Contents

Advertisement

Removing the LCD Brackets and FPC Cable

1. See "Removing the Battery Pack" on page 46.
2. See "Removing the Lower Covers" on page 49.
3. See "Removing the WLAN Module" on page 52.
4. See "Removing the Keyboard" on page 63.
5. See "Removing the LCD Panel" on page 101.
6. Turn the LCD panel over to expose the rear. Disconnect the cable from the LCD Panel using the tab provided.
7. Grip the FPC cable and lift upward to detach the adhesive pads.
8. Remove the eight securing screws (four on each side) from the LCD Panel brackets.
Step
LCD Brackets
9. Remove the LCD brackets by pulling away from the LCD Panel.
102
Size
M2*3 NL
Quantity
8
Screw Type
Chapter 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emachines e520 series

Table of Contents