Motorola MCP750 Installation And Use Manual page 129

You may specify a string (filename) which is passed on to the code
being booted. The maximum length of this string is 16 characters
(Default = null string).
ROM Boot Enable [Y/N] = N?
ROM Boot at power-up only [Y/N] = Y?
ROM Boot Abort Delay = 5?
The time in seconds that the ROMboot sequence will delay before
starting the boot. The purpose for the delay is to allow you the option
of stopping the boot by use of the
0-255 seconds (Default = 5 seconds).
ROM Boot Direct Starting Address = FFF00000?
The first location tested when PPCBug searches for a ROMboot
module (Default = $FFF00000).
ROM Boot Direct Ending Address = FFFFFFFC?
The last location tested when PPCBug searches for a ROMboot
module (Default = $FFFFFFFC).
Network Auto Boot Enable [Y/N] = N?
Network Auto Boot at power-up only [Y/N] = N?
http://www.motorola.com/computer/literature
The ROMboot function is enabled.
Y
The ROMboot function is disabled. (Default)
N
ROMboot is attempted at power-up only (Default).
Y
ROMboot is attempted at any reset.
N
Y The Network Auto Boot (NETboot) function is
enabled.
The NETboot function is disabled (Default).
N
NETboot is attempted at power-up reset only.
Y
NETboot is attempted at any reset (Default).
N
ENV - Set Environment
key. The time value is from
BREAK
6
6-7