Kenwood TK-863G Service Manual page 39

Adjustment Location
Switch
LED
Volume
Power up/down
MIC jack Programmable function keys
Note
• Flash memory
The firmware program (User mode, Test mode, Tuning
mode, etc.) and the data programmed by the FPU (KPG-76D)
for the flash memory, is stored in memory. When parts are
changed, program the data again.
• EEPROM
The tuning data (Deviation, Squelch, etc.) for the
EEPROM, is stored in memory. When parts are changed,
readjust the transceiver.
ADJUSTMENT
System
Display up/down
Adjustment Point
TX-RX UNIT (A/2)
L22
TC106
PLL/VCO
CV
L13
L5
TC109
Repair Jig
• Chassis
Use jig (Part No. : A10-4010-02) for repairing the TK-
863G. The jig facilitates the voltage check when the voltage
on the component side TX-RX unit (A/2) is checked during
repairs.
• Extension cable
Part No. : E30-3404-05
Extension cable
TK-863G
RSSI
Bx2
Ax4
Ax5
Ax2
A ø2.6 x 6
B M3 x 8
39