[Custom] - Panasonic LUMIX DMC-GM1K Basic Owner's Manual

DMC-GM1KP-VQT5D49_eng.book 37 ページ ２０１３年１０月２日 水曜日 午後６時５４分

[Custom]

[Cust.Set Mem.]
[Silent Mode]
[AF/AE Lock]
[Half Press Release]
[AFS/AFF]
[Quick AF]
[Pinpoint AF Time]
[Pinpoint AF Display]
[AF Assist Lamp]
[Focus/Release Priority]
[AF+MF]
[MF Assist]
[MF Assist Display]
[MF Guide]
[Peaking]
[Histogram]
[Guide Line]
[Highlight]
[Constant Preview]
[Expo.Meter]
[Dial Guide]
[Rec Area]
[Remaining Disp.]
[Auto Review]
[Fn Button Set]
Registers the current camera settings as custom set.
Disables operational sounds and output of light at once.
Sets the fixed content for focusing and exposure when the AF/AE lock is on.
The shutter will immediately fire when the shutter button is pressed halfway.
Assigns [AFS] or [AFF] to [AFS] of the focus mode lever.
Speeds up the focusing that takes place when you press the shutter button.
Sets the time for which the screen is enlarged when the shutter button is
pressed halfway with Auto Focus Mode set to [
Sets whether to display the assist screen that appears when Auto Focus
Mode is set to [ ] in a window or full screen.
AF assist lamp will illuminate the subject when the shutter button is pressed half-way
making it easier for the camera to focus when recording in low light conditions.
It will set so no picture can be taken when it is out of focus.
You can set the focus manually after the automatic focus has finished.
Sets the display method of MF Assist (enlarged screen).
Sets whether MF Assist (enlarged screen) will appear in a windowed
screen display or in a full screen display.
When you set the focus manually, an MF guide that allows you to check
the direction to achieve focus is displayed.
In-focus portions are highlighted when focus is being adjusted manually.
This allows you to set either to display or not display the histogram.
This will set the pattern of guide lines displayed when taking a picture.
When the Auto Review function is activated or when playing back, white
saturated areas appear blinking in black and white.
You can check the effects of the chosen aperture and shutter speed on
the recording screen in Manual Exposure Mode.
Set whether or not to display the exposure meter.
Set whether or not to display the dial operation guide.
This changes the angle of view during motion picture recording and
still picture recording.
This will switch display between the number of recordable pictures and
available recording time.
Displays a picture immediately after it is taken.
You can assign various recording and other functions to the function button.
Others
].
37
(ENG) VQT5D49