Screensaver; Auto Power Off; Sleep Timer; Factory Default - NAD T 535 Owner's Manual

SCREENSAVER

When you set [Screen Saver] to [On], a screen saver in the form of an NAD
logo appears when you leave the T 535 for fifteen minutes at Stop/Resume
mode or 30 minutes at Pause mode.
Select [Off ] to disable the screen saver function.

AUTO POWER OFF

There are three options for the T 535 to automatically power OFF. These are
Mode 1 : Select this to set the T 535 to standby mode automatically
when disc playback is stopped for more than 30 minutes or disc
playback is continued for more than six hours without operation.
Mode 2 : Select this to set this unit to the standby mode automatically
when disc playback is at Stop/Resume mode for 30 minutes or for 45
minutes at Pause mode.
Off : Select this to disable the auto power off function.

SLEEP TIMER

The Sleep Timer allows the T 535 to automatically go to standby mode after
a certain elapsed time. The Sleep Timer periods are as follows - 30 min, 60
min, 90 min, 120 min and 150 min.
To cancel the Sleep Timer function, select [Off ].

FACTORY DEFAULT

Sometimes power spikes and drop-outs may from time to time cause some
inadvertent functionality. The procedure below will set the T 535 to factory
default settings.
1. Scroll to [Factory Default].
2. Enter the four-digit password [2580] using the numeric buttons (0-9).
The confirmation screen appears. (See also the section "Parental
Password" above.)
3. Press
to select [Yes] and then ENTER to reset the T 535. All settings
are now reset to the initial factory settings.
USING THE T 535 – GENERAL SETUP MENU

DIVX REGISTRATION

DivX is the name of a revolutionary new video codec which is based on the
new MPEG-4 compression standard for video. You will be able to play DivX
discs using the T 535.
The Registration code details necessary for VOD (Video-On- Demand) service
can be shown by pressing while at [DivX Registration] menu option.
OPERATION
13