Table of Contents
Advertisement
OPERATION
uSing the t 517 - featureS
DIVX PLAYBACK
Using the T 517, you can play DivX discs.
1 Insert a disc and close the disc tray. The MOVIE menu appears on the TV
screen.
2 Press [
] to select a folder. Press [ENTER]. A list of files in the folder
appears.
3 Press [
] to select a file. If you are in a file list and want to return
to the previous Folder list, use the [
highlight "
" and press [ENTER].
4 Press ENTER or PLAY to start playback.
5 Press [STOP] to exit.
NOTES
• Playable DivX files- .avi, .mpg, .mpeg
• The total number of files on the disc should be less than 650.
16
LAST SCENE MEMORY
This player memorizes the last scene from the last disc that is viewed. The
last scene remains in memory even if you remove the disc from the player
or switch off the player. If you load a disc that has the scene memorized, the
scene is automatically recalled.
NOTE
SCREENSAVER
The screensaver appears when you leave the T 517 in Stop mode for about
five minutes. If the Screensaver is displayed for five minutes, the T 517
automatically turns itself off.
SYSTEM SELECT (230V VERSION ONLY)
You can select either Auto, PAL or NTSC to force the output of the T 517 to
the desired format. For example one can load a PAL media and display it
in the NTSC format. Similarly one can load an NTSC media and display it in
the PAL format. The Auto setting will detect automatically the media being
played and display it. Depending on the type of TV set you own, select the
signal mode you wish to watch your disc.
] buttons on the remote to
Press the [OPEN/CLOSE] button. To toggle through the system selection,
press and hold [PAUSE/STEP] key of the remote control for more than 5
seconds to select a system – Auto, PAL or NTSC.
This player does not memorize the scene of a disc if you switch off the
player before commencing to play the disc.
Advertisement
Table of Contents
