Advertisement
Overview
Congratulations on your purchase of this 360º PTZ Camera Dome! This system is
an ideal solution for monitoring a large area – a combination of a high quality CCD
image sensor mounted in a contained dome with the option to pan fully 360º.
Nothing will be out of sight for long!
Whether you wish to do this using the full complement of manual controls, or
program a detailed surveillance program for the camera to run, the PRO-690 gives
you all the options you need to simply and effectively monitor a large range of
locations without the hassle of multiple cameras.
The PRO-690 features an included fully functional PTZ controller, great low-light
performance and a 3x optical zoom – great for getting up close to what you want
to see. All this comes mounted in a simple but elegant 4" dome.
Package Contents
PRO-690 PTZ 4" Dome Camera
Ceiling Mounting Arm/Bracket
Wall Mount Arm
PTZ Controller/Receiver
Remote Control
If any of these components are missing, contact Swann Technical Support.
Contact details are on the back cover of this booklet.
4 4 4
Mounting Screws
Operating Instructions
2 x Power Adapters (DC 12V)
18m (59ft) Hybrid Video/RS485 Cable
Spare Camera Cable & Plug Board
Additional Functions
Auto-Home Function
The PRO-690 can be confi gured to automatically return to it's master Preset Point,
the "Home Point". This is particularly useful for monitoring a door, hallway, car
space or similar, where the default position of the camera should be viewing this
location.
To turn Auto-Home ON and OFF use the numerical command shown opposite.
The numerical commands are "81" to enable the Auto-Home function, and "82"
to disable it. You can also change the wait time (the amount of time the camera
will spend stationary before defaulting to the home point) by using numerical
shortcuts 77 - 80.
The Home Point is stored as PRESET 76. Defi ning this Preset Point will redefi ne
the Home Point. To remove the Home Point, follow the instructions for deleting a
Preset Point, and DELETE Preset Point 76.
F1 - F4 Shortcut Buttons
These are user-defi ned buttons, which can be used as master shortcut buttons.
Defi ning the behaviour of shortcut buttons is complex, and not recommended
for novice or intermediate users. Proper usage of the shortcut interface requires
detailed knowledge of PELCO-P/D protocols. In this example, we'll set F1 to be a
shortcut key to access Preset Point 8. The PELCO command for this operation is:
0x00 0x07 0x00 0x08.
•
Press the SHOT button, followed by -/--. Key in "240" and press ENTER.
•
The LED display will now show "0---"
•
Input X, where X is the F button you wish to assign the shortcut to. In this
example, as we want to defi ne F1, enter "1" and press ENTER.
•
The display will now show "1---". In this example, we wish to enter "0"
(abbreviation of 0x00 in hexadecimal), and then press ENTER.
•
The display will now show "2---". Continuing the above example, enter "7" and
press ENTER.
•
The display will now show "3---". Enter "0", press ENTER.
•
The display will now show "4---". Enter "8", press ENTER.
Once this has been defi ned, pressing F1 will instantly take the camera to Preset Point 8.
To create other customised shortcut programs you'll need a list of commands for PTZ
protocols. These are easily obtained via the Internet - just enter the protocol you'd like
into a good search engine and you'll fi nd several lists compiled by different authorities.
The specifi c protocol you'll use depends on your needs and limitations of your specifi c
setup. If in doubt, we suggest hiring an experience installer/technician.
17
Advertisement
