Chapter 3 Connecting The Poe Injector - TP-Link TL-POE150S User Manual

LAN IN: Connect to a
network device (such as a
Switch or Router ) with
CAT5 UTP cable.
PWR: Power LED.
indicates that
green light indicates that
PD or PoE Splitter
normally. A flashing light indicates abnormal power supply
Chapter 3
You can use TL-POE150S PoE Injector with PD or PoE Splitter
to expand your network to where there are no power lines or
outlets, where you wish to fix devices such as APs, IP Cameras
or IP Phones, etc. The following steps will tell you how to
connect the PoE Injector correctly.
1. Use a CAT5 UTP cable to connect port of Ethernet device
(such as a switch, hub or router) to the LAN IN port.
2. Please connect the power adapter properly to a power
socket with provided power cable, and then connect the
other end of the power adapter to the DC 48V port of the
TL-POE150S.
3. Connect the POWER+DATA OUT port of the TL-POE150S
to a PD or a PoE Splitter with CAT 5 UTP cable.
Now, the device can work normally with data and power.
A steady blend color of red and yellow
the power adapter is working properly.
the PoE system has detected the
and the PoE Injector is supplying power
Connecting the PoE Injector
DC 48V: Connect to the
provided power adapter
which can supply steady
power of 48V DC.
3
A steady
.