Chapter 3. Connecting The Poe Supplier Adapter - TP-Link TL-POE150S User Manual

LAN IN: Connect to a
network device (such as
a Switch or Router ) with
CAT5 UTP cable.
PWR: Power LED, a steady green
light indicates that the PoE system
has detected the PD or PoE
Receiver Adapter and the power
adapter is working properly.

Chapter 3. Connecting the PoE Supplier Adapter

You can use TL-POE150S PoE Supplier Adapter with PD or PoE
Receiver Adapter to expand your network to where there are no
power lines or outlets, where you wish to fix devices such as APs, IP
Cameras or IP Phones, etc. The following steps will tell you how to
connect the PoE Supplier Adapter correctly.
1. Use a CAT5 UTP cable to connect port of Ethernet device
(such as a switch, hub or router) to the LAN IN port.
2. Please connect the power adapter properly to a power socket
with provided power cable, and then connect the other end of
the power adapter to the DC 48V port of the TL-POE150S.
DC 48V: Connect to the
provided
which can supply steady
power of 48V DC.
3
power adapter