General Information - Radio Shack Invisible Beam Entry Alert Owner's Manual

Power Failure Alarm — triggers an external device when both
AC power and a backup DC power limited source (if one is con-
nected) are off.

GENERAL INFORMATION

Note: Some insurance companies provide a discount for homes
protected by properly installed security and fire alarm systems.
Check with your insurance carrier for requirements.
Your Invisible Beam Entry Alert is designed to conform to feder-
al regulations. To avoid problems, we urge you to read this
manual completely before you install or use the alert.
This alert is for indoor use only.
This product is UL-listed to standard number UL639 for Intru-
sion Detection Units, and should only be used with UL-listed ac-
cessories.
You need the following additional items (available at your local
RadioShack store) to install a complete Invisible Beam Entry
Alert system:
• External siren
• Phillips screwdriver
• Type CL2, 22-gauge wire
• 12-volt DC power limited source
This manual helps you plan and select the required items. Your
local RadioShack store carries additional security items you can
use with the alert.
Features
5