Honda EM650 Owner's Manual page 36

1. Drain the carburetor by loosening the drain screw. Drain the gasoline into
a suitable container.
m Gasoline is extremely flammable and is explosive under
certain conditions. Perform this task in a well ventilated area with the
engine stopped. Do not smoke or allow flames or sparks in the area
during this procedure.
2. Drain the fuel -
a. With the engine switch ON, re-
move the fuel filler cap.
b. Loosen the drain screw and drain
the fuel into a suitable container.
Retighten the screw.
c. Move the engine switch to OFF.
DRAIN
SCREW
LP
r
\
1 /'
62'
2. Change the engine oil (page 26).
3. Remove the spark plug, and pour about a tablespoon of clean engine oil
into the cylinder. Crank the engines several revolutions to distribute the oil,
then reinstall the spark plug.
4. Slowly pull the starter grip until resistance is felt. At this point, the piston is
coming up on its compression stroke and both the intake and exhaust
valves are closed. Storing the engine in this position will help to protect it
from internal corrosion.
34