5-2-7.Flash Photography Check - FujiFilm FinePix S602 ZOOM Service Manual

FinePix S602 ZOOM SERVICE MANUAL

5-2-7.Flash Photography Check

Procedure and Checks 1) Prepare the gray chart.
2) Make the necessary settings for flash photography.
· Distance between gray chart and camera : 1000mm from surface of
flash
· Recording pixels : VGA (640 x 480)
· Photography mode : M
· WB : AUTO
· Flash : Raised
· Shutter speed : 1/60
· Aperture : F5.6
3) Press the release button to take a photo.
· Check that the indicator lamp blinks green, and then changes to
orange.
· Check that the shutter sound is heard.
· Check that the flash is lit.
4) Retract the flash.
· Check that the flash symbol disappears.
5) Set the camera power lever to the Playback mode.
· Check that the photographed gray chart is displayed.
6) Check the light adjustment level and WB using the waveform monitor
and vector scope.
· Light adjustment level : (Waveform monitor)
Waveform Monitor
· WB : Within a circle of 10% of the radius, and centered on X=0%,
Y=+1% on the vector scope (distance from center of vector scope to
circle as 100%).
Vector scope
5. Inspection
49+-12IRE
Check that luminescent
spot is within specifications.
1%
Center of vector scope
10% of
10%
radius
67