4-2-7.Environmental Settings For Af Adjustment; 4-2-8.Environmental Settings For Flash Adjustment - FujiFilm FinePix S602 ZOOM Service Manual

FinePix S602 ZOOM SERVICE MANUAL

4-2-7.Environmental settings for AF adjustment

1. It sets it by using the f=600mm conversion lens and siemens star chart as shown below.
2. It illuminate on the siemens star chart by using the 2 light source. When the illuminance is insufficient, it
is not possible to adjust it by "Brightness shortage". It is necessary to adjust the source of light and the
distance of siemens star chart to about 5cm.
*The siemens star chart reflection brightness: 8.0-10.0Ev
3. Please set the lens position of the camera on the concentric circle about conversion lens.
4. It becomes "Pnmod error" while AF adjusting if the center of conversion lens and the center of the camera
lens come off largely and it is set and it cannot AF adjustment.
PC
TV Monitor

4-2-8.Environmental settings for Flash adjustment

1. When adjusting the flash, it is easy to be influenced by external light, so be sure to perform the adjust-
ment in an environment that satisfies the following conditions.
2. In order to eliminate the influence of external light, make the area around the gray chart as dark as pos-
sible.
3. The distance between the gray chart used during the flash adjustment and the camera should be 100cm.
FinePix S602Zoom
40mm+-5mm
FinePix S602
INF Adjustment:
(with f=600mm conversion lens)
900mm Adjustment :940mm+-5mm
500mm Adjustment :540mm+-5mm
100mm Adjustment :140mm+-5mm
1000mm
Surface of flash
4. Adjustment
Light(Fluorescent lamp stand)
Siemens
star chart
:640mm+-5mm
Gray chart
43