Invacare 6302G User Manual page 24

5 OPERATION
2. Remove and disassemble all jet assemblies.
• Rotate each jet assembly counterclockwise and pull away from the jet casing. (Detail "A").
• Remove each impeller cap by rotating it clockwise (Detail "B").
• Remove each impeller (Detail "C").
Detail "A"
Jet Casing
3. Clean the pieces with Dispatch™ Cleaner and Disinfectant. Lay the pieces in the footwell of the tub.
4. Spray all surfaces of the tub with Dispatch™ Cleaner and Disinfectant. Take a long handled brush and thoroughly clean the interior surfaces of
the tub and the jet casings.
5. Allow the Dispatch™ Cleaner and Disinfectant to sit on the surfaces for one minute.
6. Rinse all surfaces and pieces of the jet assemblies with water.
7. Use a clean towel to dry all tub surfaces and all pieces of the jet assemblies.
Invacare® Supine Whirlpool Tubs
Jet Assembly
Detail "B"
Impeller Cap
Impeller
24
Detail "C"
Impeller
Part No. 1167456