Sirius Satellite Radio POWERCONNECT XMp3i User Manual page 38

Vehicle Installation
Indicator . Press the Select button . The
Satellite and Terrestrial bars show the
strength of the signal being received . If the
signal reception is good, repeatedly press
back to return to the main display screen .
7 Ensure that your Radio is tuned to channel
1 . Upon power up, the Radio should tune
to channel 1 by default, when it's not yet
activated . If it's not on channel 1, refer to
the User Guide which accompanied your
Radio to learn about how to tune a channel .
8
Turn on your vehicle's stereo system . Set it
to play input from the auxiliary input source .
9
You should hear XM channel 1 through your vehicle's stereo system .
Now sit back and enjoy your favorite programming on SIRIUS|XM
Satellite Radio!
10 The audio level output of the Radio can be increased or decreased as
necessary to match the audio levels of other sources in your vehicle .
Refer to the User Guide which accompanied your Radio for instructions .
If the signal reception is good, but there is no audio when tuned to channel 1, be
sure the vehicle's stereo system is set to the correct source, i .e ., auxiliary input
source (step 8) . Also be sure that the audio level is set high enough to be heard
(step 10) . Refer to "Troubleshooting" on page 58 for additional help .
40
Meijer.com