Table of Contents
Advertisement
MAINTENANCE & ADJUSTMENTS
LUBRICATION
POINTS,
Grease: NGLI #2 Lithium Base EP
Follow the diagram to lubricate these
fittings.
l
Caster wheels (2)
l
Caster pivots (2)
l
Pulley pivots (1)
. Spindles (2 or 3) Do not over
grease the spindle. Use a long
narrow screwdriver
to check for
grease between the pulley and the
deck. If you find grease there, you
have enough.
PULLEY PIVOT
/
SPINDLES
CASTER WHEELS
STER PIVOTS
CONTROL LINKAGE ADJUSTMENT
1. Push the right-hand forward direction
control lever as far forward as you can
with finger pressure
n There should be a gap of 70 mm (23X)
L.
3.
4,
between the direction control lever and
the support bar.
To adjust the gap, loosen the two
locknuts on the linkage (the top nut has
left-hand threads) and turn the collar to
set the desired gap. Hold the collar and
tighten the lock nuts.
Now, pull the direction control lever
rearward with finger pressure
5. There should be a gap of 100 mm (4")
between the direction control lever and
the support bar.
35
Advertisement
Table of Contents
