TP-Link TL-WDR4300 User Manual page 25

for introduction. Click Next to continue.
2.4GHz - You can use the 2.4GHz band to connect to many classic wireless devices like
gaming consoles, laptops, DVRs, ect.
5GHz - This band is less crowded and is used for time-sensitive music, video streaming
or gaming. Using this band can avoid interference with 2.4GHz networks or noisy
devices like cordless phones and microwave ovens.
6. Configure the basic parameters for 2.4GHz wireless network in the following screen as
shown in Figure 3-12, and then click Next.
Wireless Radio - Displays whether the wireless function is enabled or not.
Wireless Network Name - Also called the SSID (Service Set Identification). Enter a
value of up to 32 characters. The same name must be assigned to all wireless devices
TL-WDR4300
Figure 3-11 Quick Setup – Dual Band Selection
Figure 3-12 Quick Setup – Wireless
N750 Wireless Dual Band Gigabit Router
- 15 -