Table of Contents
Advertisement
Step 2: Fasten the wall bracket to the wall
1
Using a Phillips No. 2 screwdriver, thread the drywall anchors for the
Control Unit wall bracket into marked locations that aren't at a wall
stud.
NOTE: If the marked location is at a wall stud, use a No. 8 by 1.5"
(3.81 cm) long wood screw without a drywall anchor.
Drywall Anchor for Control Unit Wall Bracket
2
Align the Control Unit wall bracket with the drywall anchors. Using the
Phillips screwdriver, thread screws into the three drywall anchors.
Don't over-tighten the screws.
NOTE: If you plan to fasten screws to a steel wall stud, you must
purchase appropriate self-drilling metal screws.
Screw x 3
Fastening the Control Unit Wall Bracket
Installing the Camera Boom and Control Unit
Drywall Anchor
Control Unit
Wall Bracket
13
Advertisement
Table of Contents
