Table of Contents
Advertisement
Fuel Shut Off Valve
The fuel shut off valve is located at the left rear of the
seat. The valve is off when the handle tab is turned
perpendicular to the fuel line.
Lifting Lever for the Mower Deck
The lifting lever is used to transfer the mower deck
from the transport position into the preferred cutting
height position.
To set the cutting height, pull out the detent ring and
place it in the desired height's corresponding hole.
To lower the deck from the transport position, press
forward on the foot pedal while pulling back on the
transport latch. This releases it from the locked
position and allows it to ease down to the detent pin,
setting the selected cutting height.
IMPORTANT INFORMATION
In order to obtain an even cutting height, it is
important that the air pressure in the front tires
is 15 psi and the rear tires is 10 psi.
IMPORTANT INFORMATION
Always raise the deck to the highest position
for transport.
CONTROLS
Fuel shut off valve in the CLOSED position
1. Detent Pin
2. Transport latch
3. Foot Pedal
The mower deck's lifting lever
8011-419
8061-007
23
Husqvarna-
Advertisement
Table of Contents
