Photo Effects - Brother DCP-350C User Manual

Photo Effects

You can edit and add effects to your photos
and view them on the LCD before printing.
Note
• After adding each effect, you can enlarge
the view of the image by pressing
Ink Management. To go back to the original
size, press Ink Management again.
• The Photo Effects feature is supported by
technology from Reallusion, Inc.
Auto Correct
Auto Correct is available for most photos. The
machine decides the suitable effect for your
photo.
a
Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (PhotoCapture).
b
Press a or b to choose Photo Effects.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Auto Correct.
Press OK.
e
Press + or - repeatedly to enter the
number of copies you want.
Press OK.
f
Do one of the following.
Press OK and change the print
settings. (See page 44.)
If you do not want to change any
settings, press Colour Start to print.
Note
If Remove Red-Eye appears on the LCD,
press a to remove red-eye from your photo.
Printing photos from a memory card or USB Flash memory drive
Enhance Skin-Tone
5
Enhance Skin-Tone is best used for adjusting
portrait photographs. It detects human skin
colour in your photos and adjusts the image.
a
Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press
b
Press a or b to choose Photo Effects.
Press OK.
c
Press d or c to choose your photo.
Press OK.
5
d
Press a or b to choose
Enhance Skin-Tone.
Press OK.
e
Do one of the following.
f
Press + or - repeatedly to enter the
number of copies you want.
g
Do one of the following.
(PhotoCapture).
Press OK if you do not want to
change any settings.
Press a or b to adjust the effect level
manually. Press OK when you have
finished.
Press OK and change the print
settings. (See page 44.)
If you do not want to change any
settings, press Colour Start to print.
5
5
39