Honda Accord Coupe 2014 Owner's Manual page 75

Indicator Name
Comes on for a few seconds
●
when you turn the ignition
switch to ON
off.
Comes on when you have
●
customized FCW to turn off.
Comes on if there is a problem
●
with the FCW system.
Blinks when the system detects
●
a likely collision with a vehicle
in front of you. The beeper
Forward
sounds.
Collision
Warning
Comes on when the FCW
●
(FCW)
system shuts itself off.
Indicator *
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
On/Blinking
Stays on constantly without FCW off - Have the vehicle
●
checked by a dealer.
, then goes
( w *1
Blinks while driving - Take appropriate action to prevent
●
a collision (apply the brakes, change lanes, etc.).
Stays on - The temperature inside the FCW system is too high.
●
The system activates when the temperature inside the system
cools down.
Stays on - The area around the camera is blocked by dirt, mud,
●
etc. Stop your vehicle in a safe place, and wipe it off with a soft
cloth.
Have your vehicle checked by a dealer if the indicator and
●
message come back on after you cleaned the area around
the camera.
Explanation
2 Automatic shutoff P. 424
2 Automatic shutoff P. 424
2 Automatic shutoff P. 424
uuIndicatorsu
Message
—
—
Continued 73