Honda Accord Coupe 2014 Owner's Manual page 69

Indicator Name
Low Oil Pressure
Indicator
Malfunction
Indicator Lamp
Charging System
Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
On/Blinking
Comes on when you turn the ignition switch to
●
ON ( w *1 , and goes off when the engine starts.
Comes on when the engine oil pressure is low.
●
Comes on when you turn the ignition switch to
●
ON *1 , and goes off either when the engine
( w
starts or after several seconds if the engine did not
start. If "readiness codes" have not been set, it
blinks five times before it goes off.
Comes on if there is a problem with the emissions
●
control system.
Blinks when a misfire in the engine's cylinders is
●
detected.
Comes on when you turn the ignition switch to
●
ON *1 , and goes off when the engine starts.
( w
Comes on when the battery is not charging.
●
Explanation
Comes on while driving - Immediately stop
●
in a safe place.
2 If the Low Oil Pressure Indicator Comes
On P. 518
Readiness codes are part of the on board
●
diagnostics for the emissions control systems.
2 Testing of Readiness Codes P. 535
Comes on while driving - Have the vehicle
●
checked by a dealer.
Blinks while driving - Stop in a safe place
●
where there are no flammable objects. Stop
the engine for 10 minutes or more, and wait
for it to cool down. Then, take the vehicle to a
dealer.
2 If the Malfunction Indicator Lamp Comes
On or Blinks P. 519
Comes on while driving - Turn off the
●
climate control system and rear defogger in
order to reduce electricity consumption.
2 If the Charging System Indicator Comes
On P. 518
uuIndicatorsu
Continued 67