Honda Accord Coupe 2014 Owner's Manual page 123

■
Storing a Position in Memory
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position
Memory
Button 1
Memory
Button 2
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
1. Set the power mode to ON. Adjust the
driver's seat to the desired position.
2. Press the SET button.
You will hear a beep, and the memory
u
button indicator light will blink.
3. Press and hold memory button
within five seconds of pressing the SET
button.
u Once the seat position has been
memorized, the indicator light on the
button you pressed stays on.
Automatic transmission/CVT models
1. Move the shift lever to ( P .
All models
2. Apply the parking brake.
3. Press a memory button ( ( 1 or
u You will hear a beep, and the indicator
light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear a beep, and the
indicator light stays on.
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat position before the double-
beep.
•
You set the power mode to any position except
1 or
( ( 2
ON.
1Recalling the Stored Position
The seat will stop moving if you:
•
Press the SET button, or a memory button (
).
2 (
•
Adjust the seat position.
•
Automatic transmission/CVT models
Shift into any position except
( 2 ).
•
Manual transmission models
Release the parking brake.
*
or
( 1
.
( P
121