Chevrolet Corvette 2014 Owner's Manual page 213

Automobile
Hide thumbs Also See for Corvette 2014:
Table of Contents

Advertisement

Press and release the TCS/
StabiliTrak
button to turn off
Performance Traction Management
and return to the traction control and
StabiliTrak systems. The traction off
light
and StabiliTrak OFF light
will go out.
Launch Control (Track
Mode Only)
A Launch Control feature is
available, within Competitive Driving
Mode (except Z51 with Magnetic
Selective Ride Control) or
Performance Traction Management
(Z51 with Magnetic Selective Ride
Control), on all vehicles to allow the
driver to achieve high levels of
vehicle acceleration in a straight
line. Launch Control is a form of
traction control that manages tire
spin while launching the vehicle.
This feature is intended for use
during closed course race events
where consistent zero to
60 and quarter mile times are
desirable.
Launch Control is only available
when the following criteria are met:
Competitive Driving Mode is
selected (except Z51 with
Magnetic Selective Ride Control)
or any of the Performance
Traction Management modes
are selected (Z51 with Magnetic
Selective Ride Control). The
TCS light comes on the
instrument panel and the
appropriate DIC message
displays.
The vehicle is not moving.
The steering wheel is pointing
straight.
Manual Transmissions
The clutch is pressed and the
vehicle is in 1 (First) gear.
The accelerator pedal is rapidly
applied to wide open throttle.
The Launch Control feature will
initially limit engine speed as the
driver rapidly applies the accelerator
Driving and Operating
pedal to wide open throttle. Allow
the engine rpm to stabilize.
A smooth, quick release of the
clutch, while maintaining the fully
pressed accelerator pedal, will
manage wheel slip. Complete shifts
as described in
Automatic Transmissions
The brake pedal must be firmly
pressed to the floor, equivalent
to a panic brake event.
The accelerator pedal is rapidly
applied to wide open throttle. (If
the vehicle rolls due to wide
open throttle, release the
throttle, press the brake pedal
more firmly, and re-apply the
accelerator to wide open
throttle.)
The Launch Control feature will
initially limit engine speed as the
driver rapidly applies the accelerator
pedal to wide open throttle. Allow
the engine rpm to stabilize.
9-45
.

Advertisement

Table of Contents
loading

Table of Contents