Table of Contents
Advertisement
Main Menu
Table of Contents
Indicator Lights
Turn Signal and
Hazard Warning
Indicators
The left or right turn signal light
blinks when you signal a lane change
or turn. If the light does not blink or
blinks rapidly, it usually means one
of the turn signal bulbs is burned out
(see page
333
). Replace the bulb as
soon as possible, since other drivers
cannot see that you are signaling.
When you turn on the Hazard
Warning switch, both turn signal
lights blink. All turn signals on the
outside of the vehicle should flash.
76
Instruments and Controls
High Beam Indicator
This light comes on with the high
beam headlights. See page
information on the headlight
controls.
On Canadian models, this indicator
comes on with reduced brightness
when the Daytime Running Lights
(DRL) are on (see page
83
''Daytime Running
Lights'' Indicator
Canadian models only
82
for
This indicator lights when you turn
the ignition switch to ON (II) with
the headlight switch off and the
parking brake set. It should go off if
you turn on the headlights or release
the parking brake. If it comes on at
any other time, it means there is a
).
problem with the DRL. There may
also be a problem with the high
beam headlights.
Advertisement
Chapters
Table of Contents
