Honda 2003 Odyssey Owner's Manual page 339

Main Menu Table of Contents
Lights
4. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
5. Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
6. Turn on the lights to make sure
the new bulb is working.
7. Reinstall the taillight cover.
336
Maintenance
Replacing a High-mount Brake
Light Bulb
SCREW
1. Place a cloth on the edge of the
lens segment on the passenger's
side. Remove that lens segment by
carefully prying on its edge with a
small flat-tipped screwdriver.
2. Use a Phillips-head screwdriver to
remove the screw under the lens.
3. Pull the light assembly out of the
tailgate.
4. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
5. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.